Parallax Power Supply Power Management System 120 Volts/ 20 Ampere ALS20
Compatibility
Automatically Switch Off A Secondary Load In A High Current Situation
Power Capacity
120 Volts/ 20 Ampere
Share this page
Parallax Power Supply Power Management System
Power Management System; Use To Automatically Switch Off A Secondary Load In A High Current Situation; Allows Two High Current Devices To Connect With Single 20 Amp Breaker; 120 Volt/ 20 Amp; Priority Load 120 Volt AC/ 20 Amp Max; Shed Load 120 Volt AC/ 18 Amp Max; 4-3/4 Inch Width x 4-1/8 Inch Height x 6-1/4 Inch Depth
MPN: ALS20
The Power Management System automatic load shed is designed to automatically switch off a secondary load in a high current situation. This allows for the connection of two high current devices to a single 20 Ampere breaker. Often the job of the Power Management System has been performed by a manual device selector switch. Typically the Power Management System will be configured so that when the on demand current is at a very high level the Power Management System will automatically shed, or disconnect a secondary load such as a water heater whose operation can be temporarily postponed without directly affecting the user. This situation would normally occur by activating a high current on-demand device such as a microwave or hair dryer. In addition the Power Management System may also be installed to allow for the operation of more than 2 thermostatically controlled devices on a 120 Volt 30 Ampere service, as per the NEC 551-42©. After the current demands drop on the circuit, and a short safety delay the Power Management System will automatically switch the disconnected load back on.
Compatibility: Automatically Switch Off A Secondary Load In A High Current Situation
Power Capacity: 120 Volts/ 20 Ampere
Features
- Designed To Automatically Switch Off A Secondary Load In A High Current Situation
- Will Automatically Shed, Or Disconnect A Secondary Load Such As A Water Heater Whose Operation Can Be Temporarily Postponed Without Directly Affecting The User
- May Also Be Installed To Allow For The Operation Of More Than 2 Thermostatically Controlled Devices
- Limited 2 Year Warranty
Specifications of Parallax Power Supply Power Management System 120 Volts/ 20 Ampere ALS20 | |
Compatibility | Automatically Switch Off A Secondary Load In A High Current Situation |
Power Capacity | 120 Volts/ 20 Ampere |
No questions found. Be the first?
Reviews for Parallax Power Supply Power Management System 120 Volts/ 20 Ampere ALS20(0)
There are no reviews for this product.