Hello, Sign inMy Account
Register Login
My Garage 0 Wishlist (0)
                                                                                                                                                                                         *** Attention: Current axle delivery time has decreased by Dexter to up to 6 weeks ***                                                                                                                                                                                         *** Attention: Current axle delivery time has decreased by Dexter to up to 6 weeks ***

How To Replace Trailer Axle

How To Replace Trailer Axle

Replacing a trailer axle is a complex task that requires advanced mechanical skills and specialized tools. It is recommended to seek professional assistance or consult an experienced trailer technician for proper axle replacement. However, here are some general steps that outline the process:

1. Safety first: Park the trailer on a level surface and engage the parking brake. Chock the wheels to prevent any movement.

2. Jack up the trailer: Use a hydraulic jack to raise the trailer off the ground. Place jack stands under the frame near the axle to provide additional support.

3. Remove the wheels: Loosen the lug nuts on the wheels and remove them. Set the wheels aside in a safe location.

4. Disconnect the brake lines: Locate the brake lines connected to the axle. Use a flare nut wrench to loosen the fittings and disconnect the brake lines. Ensure that the brake lines are properly capped or sealed to prevent fluid leakage.

5. Disconnect the suspension components: Depending on the trailer type and axle configuration, you may need to disconnect the suspension components such as leaf springs or torsion arms. Follow the manufacturer's instructions or consult an expert to properly detach these components.

6. Remove the axle: With the trailer properly supported, remove the bolts or fasteners securing the axle to the frame. Carefully lower the axle using a jack or lift, ensuring it does not damage any surrounding components.

7. Install the new axle: Position the new axle in place and align it with the mounting holes on the trailer frame. Secure the axle to the frame using appropriate bolts or fasteners, following the manufacturer's specifications.

8. Reconnect the suspension components: If you had to disconnect any suspension components, reattach them to the new axle according to the manufacturer's instructions.

9. Connect the brake lines: Reconnect the brake lines to the appropriate fittings on the new axle. Use a flare nut wrench to tighten the fittings securely.

10. Check and adjust alignment: Ensure that the new axle is properly aligned with the trailer frame. Make any necessary adjustments to ensure even weight distribution and proper tire contact with the ground.

11. Reinstall the wheels: Place the wheels back on the trailer and tighten the lug nuts to the manufacturer's recommended torque specifications.

12. Lower the trailer: Carefully lower the trailer off the jack stands using a hydraulic jack, ensuring it is stable and resting evenly on the new axle.

It is important to note that these steps provide a general overview of the process, but the specific steps and requirements may vary depending on the trailer type and axle configuration. It is highly recommended to consult the trailer owner's manual or seek professional guidance for accurate and safe axle replacement on your specific trailer.