Dexter Hydraulic Brake Assembly for 3500 Lbs Axle - 10 Inch - K23-311-00
Dexter Duo-Servo Trailer Hydraulic Brake Plate Assembly
Dexter offers several varieties of hydraulic trailer brakes. Your vehicle may be equipped with drum brakes or disc brakes. The hydraulic brakes on your trailer are much like those on your automobile or light truck. The hydraulic fluid from a master cylinder or actuation system is used to actuate the wheel cylinder which, in turn, applies force against the brake shoes and drum. The main difference between automotive hydraulic brakes and hydraulic trailer brakes is the trailers' actuation system. These systems respond to the braking signal from the tow vehicle and supply the required brake fluid volume and pressure to the trailer brakes. Duo-Servo The duo-servo brake uses a dual piston wheel cylinder to apply the brakes. This type of brake is typically used in an electric/ hydraulic, vacuum/hydraulic, or air/hydraulic system. A description of operation of this brake is as follows: When the brakes are applied, the double-acting wheel cylinder moves the primary and secondary shoes towards the drum. The frictional force between the brake drum and lining attempts to turn the primary shoe into the secondary shoe. The secondary shoe is forced onto the anchor pin and Backing Actuating Pin Plate from this point, the secondary Hold Down and primary Secondary Spring shoes attempt to Shoe "wrap around". Primary Shoe In essence, the Adjuster Spring brake has utilized Adjuster Assembly frictional force to help the applying force on both shoes. If the brakes are applied while the vehicle is backing, the shoes rotate in the direction of the drum rotation. This causes the secondary shoe to leave the anchor and causes the primary shoe to move against the anchor. Action of the brake is the same in reverse as forward. This Trailer Brake Assembly is built to the highest standards of the RV industry and will last a long time. So you can buy this high quality product with confidence knowing that it will work well with your RV. Made in the USA.
MPN: K23-311-00
Compatibility RV Trailers
Features
Diameter: 10 Inch
Width: 2-1/4 Inch
Brake System: Hydraulic
Brake Type: Drum
Axle Weight Capacity: 3500 Pound
Position: Right
Includes Backing Plate: Yes
Includes Brake Shoes: Yes
Includes Magnets: No
Includes Actuating Lever: No
Includes Adjusting Screw: Yes
Includes Spring Hardware: Yes
Length | 10" |
Width | 10” |
Height | 2.25” |
Limited 90 Day manufacturers warranty. All warranty claims should be
pursued directly with the manufacturer.
Specifications of Dexter Hydraulic Brake Assembly for 3500 Lbs Axle - 10 Inch - K23-311-00 | |
Brake System | Hydraulic |
Axle Weight Capacity | 3500 Lbs |
Position | Right |
Diameter | 10 Inch |
Actuation Type | Manual Adjusting |
Brake Type | Drum |
Dexter Trailer Brake Adjusting Screw 043-004-00
Dexter Axle Trailer Brake Adjusting ScrewMPN: 043-004-00 Compatibility: Dexter Hydraulic And Electri..Dexter Trailer Brake Return Spring 046-009-00
Dexter Axle Trailer Brake Return SpringMPN: 046-009-00Dexter's manufacturing facilities employ state..Dexter Trailer Brake Master Cylinder 054-065-01
Dexter Axle Trailer Brake Master CylinderMPN: 054-065-01Dexter's manufacturing facilities employ sta..Dexter Trailer Brake Adjusting Screw Spring 046-123-01
Dexter Axle Trailer Brake Adjusting Screw SpringMPN: 046-123-01 Compatibility: Dexter Free Backing C..Dexter Trailer Brake Adjusting Screw Spring 046-123-00
Dexter Axle Trailer Brake Adjusting Screw SpringMPN: 046-123-00 Compatibility: Dexter Free Backing H..No questions found. Be the first?