Draw-Tite Gooseneck Hitches
Unrestricted use of your truck bed
Draw-Tite gooseneck hitch systems allow unrestricted use of the pick up bed. In-truck platforms support 2-5/16 in. and 3 in. hitch balls. All framework resides under the bed of the truck with only the bed exposed. Stronger, and able to utilize the full suspension of the truck, these hitch systems are rated up to the full towing capacity of the vehicle. Same rail kit-3 methods of head attachment: 1.) Hide-A-Goose 2.) Fold-Down 3.) Remov-A-Ball
High strength chrome plated ball stores in truck bed
Accommodates all standard vehicle suspensions with no alteration of O.E. exhaust systems required.
Features
30,000 lbs. gross trailer weight and 7,500 lbs. vertical load
Tested to SAE J2638 static and REESE dynamic specs
2-5/16 in. high strength chrome plated ball standard
Magnetic cover protects ball hole when not in use
Spring loaded safety chain loops included
No alteration of factory exhaust systems required
Requires rail kit installation
Forged, heat treated chrome ball
Takes only seconds to raise and lower the ball into position.
Features
25,000 lbs. gross trailer weight and 6,250 lbs. vertical load
2-5/16 in. high strength chrome plated ball standard
Oversize pull ring allows user to raise or lower the ball while wearing gloves
Integrated grease fitting is visible and easily accessible
No alteration of factory exhaust systems required
Requires rail kit installation
Lockable to prevent ball theft
In-truck platform may be used with rail kits or installed directly to vehicle.
Features
30,000 lbs. gross trailer weight and 7,500 lbs. vertical load
Spring loaded chrome sliding pin to ensure positive ball lock
2-5/16 in. high strength zinc plated ball standard
Magnetic cover protects ball hole and activating lever slot when not in use
Accommodates all standard vehicle suspensions with no alteration of O.E. exhaust systems required
Requires rail kit installation